Vídeo de Configuração
-
How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps:Step 1. Log in to the ControllerStep 2. Adopt DevicesStep 3. View Dashboard and MenusStep 4. Set up WANStep 5. Set up LAN and VLANsStep 6. Set up Wi-FiStep 7. Set up ACL
Mais Pasta
-
How to Install and Set Up Omada Software Controller
This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.
Mais Pasta
-
How to Adopt Omada Devices via Omada Controller
This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).
Mais Pasta
-
How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller
This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.
Mais Pasta
-
How to Monitor and Manage Devices via Omada SDN Controller
This video will show you how to monitor and manage devices via Omada SDN Controller.
Mais Pasta
-
How to Configure Schedules to Automate Network Control via Omada SDN Controller
This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.
Mais Pasta
-
How to Monitor and Manage Clients via Omada SDN Controller
This video will show you how to monitor and manage clients via Omada SDN Controller.
Mais Pasta
-
How to Check the Clients Signal Strength and Estimate the Actual Speed
This video will show you how to check the client signal strength and estimate actual network speeds.
Mais Pasta
-
How to Create User Accounts on Omada SDN Controller
This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.
Mais Pasta
-
How to Configure Bandwidth Control via Omada SDN Controller
This video will show you how to configure bandwidth control via Omada SDN Controller.
Mais Pasta
-
How to Configure Load Balancing
Filtro de Caraterísticas : Tudo Guia de ConfiguraçãoRequisito de Aplicação do UtilizadorResolução de ProblemasP&R de explicações funcionais ou parâmetros de especificaçõesQuando ConfigurarAssistência Adicional
FAQs
- How to set up Access Control of TP-Link Omada Router in Standalone and Controller 06-05-2024700
- How do I Upgrade Firmware of Omada Gateway in Standalone Mode? 06-04-2024692
- Client is unable to access the Internet for business router 06-03-20241432
- How to configure WAN IP Alias for Omada Gateway 06-03-20241603
- How to use Iperf to test the speed on TP-Link routers 04-29-2024160105
- How to connect to Omada Router using IKEv2 VPN of Android/iOS 04-22-202473242
- How to configure Site-to-Site WireGuard VPN on Omada Controller 03-22-20246197
- How to configure WireGuard VPN on Omada Router in Standalone mode? 03-21-2024102886
- How to create multi networks and manage network behavior with ACL on Omada Gateway in standalone mode 03-13-202479122
- How to configure Omada Gateway as a PPTP/L2TP VPN Client to enable the VPN Server as Proxy Gateway for backend clients 01-03-20248526
- Why failing to achieve bandwidth aggregation of multiple WAN ports by Speedtest on SMB router 12-27-202353601
- How to setup your SafeStream router in standalone mode 12-27-202383620
- How to configure Link Backup on Dual WAN Router using the new GUI 12-27-2023208840
- How to configure Link Backup in Controller Mode 11-27-20239591
- 10-09-202315444
- How to use the Emergency Mode to recover the firmware for Omada Gateways 10-09-202351565
- 09-26-202313119
- How to implement unidirectional VLAN access through ACL configuration on the Omada Gateway in Controller mode 09-19-202314495
- How to Configure IPsec Failover on Omada Router in Standalone mode 07-26-202324265
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via Port Forwarding (Controller 5.0 or Above) 04-23-202338991
- How to Manage Omada Devices at Different Sites Using Omada SDN Controller via VPN (Controller 5.0 or Above) 04-23-202329210
- Qual é a diferença entre o perfil "Master Administrator", "Administrador" e "Viewer" no Omada Controller? 04-05-202326335
- Como utilizar a ferramenta Ping no Omada APP 04-05-202328951
- How to Configure TP-Link Omada Gateway as OpenVPN Server onController Mode 04-14-202343685
- How to Configure TP-Link Omada Gateway as OpenVPN Server on Standalone Mode 04-14-202338658
- How to Configure TP-Link Omada Gateway as OpenVPN Client 04-14-202341442
- How to install LDAP server on Windows and work with Omada Router to achieve unified account management 02-02-202328984
- How to Install LDAP server on Ubuntu 02-02-202326657
- How to Configure TP-Link Omada Router with Starlink Internet 12-26-2022102568
- 09-09-2022110542
- How to add an Omada Gateway to the network?(Controller 4.3.5 or below) 08-01-2022108017
- How to add an Omada Gateway to the network? (Controller 4.4.3 or above) 07-20-202266728
- How to configure WOL (Wake On LAN) on TP-Link SafeStream Router using the new GUI 06-27-2022202672
- How to establish a PPTP Server by Omada Gateway in Standalone mode 06-27-202240966
- How to establish an L2TP Server by Omada Gateway in Standalone mode 06-27-202258798
- What to do if you want to access the Internet with the local gateway rather than the PPTP/L2TP VPN Server 06-27-202247110
- What to do if you cannot access the remote network through Client-to-LAN/Site VPN tunnel 06-27-202295173
- How to Set up Site-to-Site Manual IPsec VPN Tunnels on Omada Gateway in Controller Mode 06-27-202287261
- How to set up site-to-site Auto IPsec VPN Tunnels on Omada Gateway in Controller Mode 06-27-202273396
- How to manage Omada devices at different sites across Internet using Omada Controller 06-27-2022101286
- How to set up DHCP reservation for clients on Omada Gateway in Controller mode 06-24-202254583
- How to set up router on a stick with Omada gateway and L2 switch 06-24-202236678
- How to preconfigure WAN settings on Omada Controller (v5 or above) 06-24-202253806
- How to configure PPTP/L2TP/OpenVPN Client to access peer server through site-to-site VPN using business router 06-24-202274970
- The difference between Standalone mode and Controller mode of Business router 04-18-202248402
- The solution for the System Log data of ER7206/ER605 not passing through the IPsec VPN tunnel to syslog server 01-11-202236126
- What should I do when the Omada Software Controller (V4) fails to discover the devices? 11-23-2021106568
- VLAN configurations of the LAN ports on Omada Gateway in Controller mode 08-23-202168414
- Why virtual server (port forwarding) feature is not working on your TP-Link Business router? 08-03-202184699
- Why can’t my Mac access the remote network after connecting to the VPN server of the Omada Gateway? 05-26-202183725
- How to check the link status and data traffic statistics of TP-Link Business Routers with SNMP 04-16-202161304
- Source code template for External Web Portal (Business Router) 03-15-202140959
Firmware
Atualização de firmware pode resolver problemas da versão de firmware anterior e melhorar o seu desempenho atual.
Para atualizar
IMPORTANTE: Para evitar falhas de atualização, leia o seguinte, antes de prosseguir com o processo de atualização
- Verifique a versão de hardware do seu dispositivo para a versão de firmware correta. Atualização incorreta de firmware pode danificar o seu dispositivo e anular a garantia. ( Normalmente V1.x = V1)
NÃO é recomendado atualizar o firmware de outra região. Por favor clique aqui escolher a sua região e efetuar o download da versão de firmware adequado. (O firmware EU (Europa) e US (Estados Unidos) dispõe de versões de hardware diferentes) - NÃO desligue a energia durante o processo de atualização, pode causar danos permanentes ao produto.
- NÃO atualize o firmware através de ligações Wi-Fi, expeto nos casos onde não dispõe de portas rede LAN/Ethernet no dispositivo TP-Link.
- Recomenda-se que os utilizadores interrompam todos os acessos à Internet ou simplesmente desconectem a ligação à Internet do dispositivo antes de efetuar a atualização.
- Para extrair o conteúdo com o ficheiro de atualização, recomendamos a utilização de programas de descompressão, como por exemplo, WinZIP, WinRAR ou 7-Zip.
Mais Pasta
ER605(UN)_V2_2.2.4 Build 20240119 | Descarregar | |
---|---|---|
Data de Publicação: 2024-01-23 | Idioma: Inglês | Tamanho: 22.33 MB |
This firmware is fully adapted to Omada SDN Controller 5.13. Please make sure the firmware version before upgrading is ER605(UN)_V2_2.2.3 Build 20231201, otherwise the firmware upgrade will fail. New Feature/Enhancement: 1. Add support for Deep Packet Inspection. 2. Add support for IPsec acceleration in all dial methods. 3. Optimized the WAN port selection logic of the Auto IPsec in Controller mode. Bug Fixed: 1. Fixed some known security vulnerabilities. Notes: 1. If you have disabled the HTTPS port, please enable the HTTPS port before upgrading the firmware. 2. Your device’s configuration won’t be lost after upgrading. |
ER605(UN)_V2_2.2.3 Build 20231201 | Descarregar | |
---|---|---|
Data de Publicação: 2023-12-21 | Idioma: Inglês | Tamanho: 20.28 MB |
Nota de Lançamento > This firmware is fully adapted to Omada SDN Controller 5.11. |
ER605(UN)_V2_2.2.2 Build 20231017 | Descarregar | |
---|---|---|
Data de Publicação: 2023-10-18 | Idioma: Inglês | Tamanho: 20.08 MB |
Nota de Lançamento > This firmware is fully adapted to Omada SDN Controller 5.11. The Standalone web page uses HTTPS by default, if you have disabled the HTTPS port, please enable the HTTPS port before upgrading the firmware. |
Utilização de firmware de terceiros em produtos TP-Link
Alguns produtos TP-Link permitem a substituição de firmware oficial por firmware de terceiros (Por exemplo DD-WRT). A TP-Link não se sente obrigada a facultar assistência e suporte e não garante estabilidade nem a performance de firmwares de terceiros. Danos provocados pela utilização de firmwares de terceiros, inviabiliza automaticamente a politica de garantia dos nossos produtos.
Código Open Source para Programadores (GPL)
Nota: Os produtos TP-Link contêm parcialmente código de software desenvolvido por terceiros, incluindo software que foi submetido ao GNU General Public License ("GPL"), Versão 1/Versão 2/Versão 3 ou GNU Lesser General Public License ("LGPL"). Pode utilizar a respetiva condição de software seguindo os termos da licença GPL.
Pode rever, imprimir e efetuar o download dos respetivos termos da licença GPL aqui. Terá acesso ao Código Fonte GPL dos respetivos softwares utilizados nos produtos TP-Link para download e investigação, incluindo a lista de software TP-Link que contêm software GPL ao abrigo do Centro de Código GPL.
Os respetivos programas são distribuídos sem qualquer garantia e suporte. Reveja a licença de GNU - General Public License para mais detalhe.
Apps
- Omada APP
O TP-Link Omada permite-lhe configurar definições, supervisionar o estado da rede e gerir clientes, tudo a partir da comodidade de um smartphone ou tablet. Saiba mais sobre os Equipamentos Compatíveis.
Nota: O switch/router SDN é compatível com a aplicação Omada apenas no modo de controlador.Para utilizar a Omada, actualize o firmware do seu equipamento OMADA para a versão mais recente.
Código GPL
- ER605(UN)_V2_GPL
Emulador
Versão de firmware | Modo de Funcionamento | Idioma | |
---|---|---|---|
20230607 | - | Inglês | Procurar |
220907(UN) | - | Inglês | Procurar |
Nota Importante:
1. O emulador é um GUI web virtual onde pode experimentar o painel de gestão de produtos TP-Link.
2. Os emuladores listados podem não ter o firmware mais recente.
3. As características apresentadas são para referência e a sua disponibilidade pode depender dos regulamentos locais (EU/Portugal). Para mais informações, consulte as Especificações Técnicas no Datasheetou a Página do Produto.